Process/Kana Inc. - Serving Industrial & Markets Since 1981
800.325.4748
All Categories > Tanks > Belding Tank Technologies
Fiberglass Tanks
 
 

Belding Tank Technologies
Fiberglass Tanks



Click on a Product to view details.

Belding Cone Bottom Tanks

Belding Cone Bottom Tanks


Cone Bottom tanks offer complete drainage. Belding Tank’s standard cone apex angle is 90°. All Cone Bottoms are designed in accordance with ASTM D-3299 or D-4097 standards for elevated cone heads. Cone Bottom tanks come standard with a primed carbon steel pipe leg stand with floor plates and a standard 18 in under clearance from the tank bottom to the floor plates. Therefore, when complete drainage is an absolute must, the Cone Bottom design is the only choice.
Belding Dish Bottom Tanks

Belding Dish Bottom Tanks


Dished Bottom tanks offer near complete drainage. All Dished Bottoms are designed in accordance with ASTM D-3299 or D-4097 standards for elevated ASME Flanged & Dished torispherical heads. Dished Bottom tanks come standard with a primed carbon steel pipe leg stand with floor plates and a standard 18” under clearance from the tank bottom to the floor plates. When head pressure is required at the output, the Dished Bottom design is the most cost effective choice.
Belding Double Wall Tanks

Belding Double Wall Tanks


Belding Tank® responds to the growing demand to ensure safety in handling hazardous chemicals with Dual-Tek™ - The only design in process storage that offers the advantages of Double Wall Containment and leak detection with no compromise in flow-thru design. This means you can specify the location of every fitting instead of top-only installation. With over 600 standard sizes, you’ll be sure to get the fastest delivery possible.
Belding Flat Bottom Tanks

Belding Flat Bottom Tanks


Flat Bottom tanks are the most common used tanks in the industry. All Flat Bottoms are designed in accordance with ASTM D-3299 or D-4097 standards. They are the most cost effective way to store product. The tank flat bottom requires a flat surface to give full support.
Belding Horizontal Tanks

Belding Horizontal Tanks


Horizontal tanks are a great choice when floor space is not an issue and head room is at a minimum. The Horizontal tank ends are ASME Flanged & Dished for added strength and capacity. Horizontal tanks come standard with a minimum of two primed carbon steel support saddles which provide a standard 12” under clearance from the tank bottom to the bottom of the saddles.

Support saddles can be provided as painted carbon steel, Fiberglass Reinforced Plastic (FRP), T-304 or T-316 stainless
Belding Internal Sloped Bottom Tanks

Belding Slope Bottom Tanks


Sloped Bottom tanks are offered as both Internal and External. All Sloped Bottoms are designed in accordance with ASTM D-3299 or D-4097 standards. Internal Sloped Bottoms come standard with a 1 in minor and bottom core to sit flat on your support pad. External Sloped Bottoms require the customer to provide a sloped support pad. Belding Tank’s standard pitch is 1/4 inch per foot to allow drainage to the low side of the slope. Either bottom design requires full bottom support.